Volvo RTI Instrucciones de operaciones descargar pdf (Pagina 10)

In this test we have been using Lark Freebird 4.3 inch NAV (Problem only Polish maps), but you can use

whatever NAV in the marked as long it will fit inside the RTI unit where the display have been connected

and has a “Push” bottom to start. We also has made this so if you save the old display and some screws

and the original plastic front you can if you want reverse everything and the Volvo RTI will work as before.

This in case Volvo sometimes maybe do something, but of course it is long time since we stopped to

belive in Santa Clause, but you never know, maybe somebody makes something useful in the future. It is

pitty that with this we lose the back camera options, which you easely can connect to the original display

in the RTI. If somebody needs help or have comments you are welcome to contact us at Special

Machines/Electronic Department by e-mail in english, swedish or norwegian: smed@nasab.com

We wish you Good luck!

Electronic Schema NAV/RTI

Now we will show you the electronical pc board and schema. You can use 12V DC version or the 5V DC

version. Both is working, but we chosed the 5V DC model because we want to be sure not to get +12V DC

into the RTI standard Electronic or the NAV by misstake, so if you want to be sure, use the 5V DC version.

This electronic will make the NAV start when the RTI unit is going up and close the NAV automatically

when the RTI unit goes down. For the external Audio Sound modification of the TV tuner for NAV you can

find under. http://www.nasab.com/Volvo/External%20Sound%20NAV-RTI%20Volvo%20Part%20One.pdf

12V version:

Just eliminate the LM7805

Nas ab

47K

RC05

1KRC05

100K

RC05

220uF

RAD-315

100nF

CK05

1AT

CONN02

GA1247B

GN D

OUT

T1LM7805

TO-39

1N4148

DO-7

1N4148

DO-7

BC337

TO-92

SW_RTI-Down

SW_RTI-Up

Switch

1N4148

DO-7

Switch

+12V from pin 11 RTI connector (Vdd)(Battery).

0V from pin 16 RTI Connector. (0V, ground)

+12 to USB NAV charger from pin 13 RTI connector (Ignition on).

Switch only in case of if the NAV starts in wrong

sequence. (Sequence Reset Bottom).

Or you can by sending the RTI unit up and down

fast even get the NAV to start at the right

sequence. NAV have 10 sec to close in auto mode.

Be sure you check which

side of the push bottom

in NAV is connected to

0V.

NAV/RTI Electronic PC Board 4-900054

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Comentarios a estos manuales

Sin comentarios

Volvo RTI Instrucciones de operaciones Pagina 10

Comentarios a estos manuales

Relacionado con productos y manuales para Navegadores Volvo RTI