Volvo RTI Guía de instalación descargar pdf (Pagina 17)

Page

Look at the connector as shown in the picture below. Pin 1 is on the top row on the side that inserts into

protective brown cover; this is the top right in the picture. You will notice that either pin 8 or pin 27 is

empty. That is where you will insert the REM power cable’s contact.

DOUBLE COUNT TO MAKE SURE THAT THE PIN IS BEING INSERTED INTO THE CORRECT LOCATION. DOUBLE CHECK THE

ORIENTATION OF THE CONTACT AS WELL.

Gently push the contact into place. It should make a light click when it is properly inserted.

1 2 ... 12 13 14 15 16 17 18 19

Sin comentarios

Volvo RTI Guía de instalación Pagina 17