Volvo D2 Series Manual del operador descargar pdf (Pagina 28)

Instrumentation

Display mode Graph (button 4)

This display mode shows operating information in

the form of a histograph. Press button 4 repeatedly to

show different operating information.

If an item of operating information is not available,

that window cannot be chosen.

If contact with the relevant information is lost during

display, the curve will no longer be drawn, but the line

will continue to scroll across the window.

The maximum time interval can be set to one of the

following values in the conﬁguration menu: 2 min, 10

min, 30 min, 1 h, 2 h, 4 h, 8 h.

The interval on the Y-axis is set automatically for the

best view.

(shows engine speed)

Set the appearance of display mode Multi

Display mode MULTI has a mode for setting which

operating information should be displayed in which

window.

The setting mode is reached by pressing button 5

(far right), when you are in the display mode MULTI.

Please refer to the illustrations below.

Note! The type of operating information available

depends on the electrical system in the boat and the

sensors that the boat is equipped with. Optional sen-

sors include depth sounder, water temperature and

speed.

Note! The following applies for standard instrument

display:

The maximum engine speed range can be set on the

conﬁguration menu.

The voltage range can be [8V: 16V] and is changed

automatically, depending on the latest data value.

Press button 5 to choose setting mode

Buttons 1 to 4 are used to adjust the

corresponding window (refer to the black

markings)

Display mode Multi (button 2)

This display mode shows operating information in

four different windows (see below). The user can

choose which operating information is to be shown in

which window.

The information can be displayed as ﬁgures or as a

standard instrument. The display switches between

different modes when button 2 is pressed repeatedly.

If an item of operating information is not available, the

unit displays ”—” and the analog gauge needle is not

shown.

From display mode MULTI one can also reach SYS-

TEM INFORMATION, the display mode that functions

in the same way as the small display in the tachome-

ter. Read more about display mode SYSTEM INFOR-

MATION in the conﬁguration menu section.

Example of display in several windows

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 75 76

Comentarios a estos manuales

Sin comentarios

Volvo D2 Series Manual del operador Pagina 28

Comentarios a estos manuales

Relacionado con productos y manuales para Motor Volvo D2 Series