Volvo D2 Series Manual del operador descargar pdf (Pagina 33)

Operation

Maneuvering

All shifting between ahead and astern must be done

at engine idle speed. Shifting at higher speeds may

damage the drive or reverse gear and will also be

uncomfortable for those on board.

1. Reduce engine speed to idling and, if possible, let

the boat lose most of its speed.

2. Move the reverse gear control lever quickly and

ﬁrmly into the neutral position. Wait for a moment.

3. Move the gear control lever quickly and ﬁrmly into

astern, then increase the speed.

When sailing

When sailing the control lever should be in the

neutral position if the boat is equipped with HS25

reverse gear. If the boat is equipped with

S-drive or MS25 reverse gear the control lever

should be the reverse position if a folding propeller

is used and in neutral position if a ﬁxed propeller is

used.

Trolling operation valve

HS25 reverse gear can be equipped with a trolling

operation valve which makes it possible to steplessly

reduce the boats lowest speed by 20-80% at engine

speeds up to 1200 rpm.

IMPORTANT! At engine speeds above 1200

rpm, the reversing gear can overheat.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 75 76

Sin comentarios

Volvo D2 Series Manual del operador Pagina 33